The toner cartridge is leaking. Did this solve your problem? If the pencil rolls, the surface is not level. This releases the pressure on the transfer belt unit. Ozone Release During printer operation, a small quantity of ozone is released.

Uploader: Nelabar
Date Added: 15 April 2010
File Size: 60.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 29627
Price: Free* [*Free Regsitration Required]

The printable area on all media sizes is up to 0. I had no problems with the Vista driver for the – works a treat in 64bit but try as I may I have not yet got the Magicolor2 to work. In the Uninstall window, select the magicolorW.

Do not tilt, lubricate, or disassemble the printer. They really are not tuned in in the slightest and should koonica be putting advice about that clearly does not help anyone. Replace the tape and packaging. Duplex Option Close the right-side door securely. In reply to franktTheTank44’s post on April 30, There is a 0.

Solving Other Problems Something is wrong with the outlet connected to the printer. High-capacity toner cartridge Holding both ends of the toner car- tridge, shake it side-to-side a few times to distribute the toner evenly.


Monochrome ppm Monochrome ppm 3. Unfortunately, there are no Windows 7 drivers for the magicolor W, and there will not be any Windows 7 bit drivers developed. Double-click the Status Display icon in the taskbar. Output Tray Open the right-side door, then close it.

Konica Minolta Magicolor 2300W Installation Manual: Install The Printer Driver

Using Media Using Media The actual life expectancy will vary depending on these and other printing variables, including continuous or koniica printing, ambient temperature, and humidity. Remove any tape from the duplex unit.

If the printer is to be used as the default printer, select the Set as default printer? Carefully remove the jammed media.

The thing that amazes me the most is that there are pages on the KM website giving you details on how to install this specific printer using koinca, it lists the printer as one of its models where the method it describes will work. Fuser Jams Lift up the two fuser unit levers.

Close the right door. PJM-1 Replied on June 22, Depending on the version of the operating system, Magicoolr may not appear. Not underneath the printer or another machine as this can result in dam- age to that cord. The job is very complex.


Page Attach the support wire for the duplex option to the printer. Rotate the transfer belt release lever counterclockwise to its correct 7: Got it, continue to print. Print several blank sheets and the excess toner should disappear.

Konica Minolta W – Cannot install drivers under Win 7 x64 – Microsoft Community

Konica Minolta magicolor W Drivers Download. The Vista driver mminolta this printer is actually on the Vista DVD but only supports 32bit and will not even install on my 64bit setup.

User-replaceable toner cartridges Kinolta Service Messages A service message sometimes occurs as a result of an unusual combination of events, not because of an actual problem. This device must be used with shielded interface cables.