Our products are under continual improvement and we reserve the right to make changes without notice. To connect the ATX pin power supply, make sure the plug of the power pin 13 supply is inserted in the proper orientation and the pins are aligned. Pull the lever s ideways away from the socket. You may use the pin ATX power supply as you like. Hardware Setup Hardware Setup This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as how to setup the jumpers on the mainboard.

Uploader: Arashitaur
Date Added: 7 December 2013
File Size: 60.31 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 12735
Price: Free* [*Free Regsitration Required]

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Hook one end of the clip to hook first, and then press down the other end of the clip to fasten the cooling s et on the top of the retention mechanism. As the CPU is likely to move while the lever is being closed, always close the lever with your fingers pressing tightly on top of the CPU to make sure the CPU 11.0 properly and completely embedded into the 718. Pull the lever s ideways away from the socket. Hardware Setup Hardware Setup This chapter ve you how to install the CPU, memory modules, and expansion cards, as well as how to setup the jumpers on the mainboard.


As the end user cannot boot without SP4, a combination installation CD must be created before attempting to install the operating system onto the bootable RAID volume.

MSI MS Instruction manual |

Make js to raise the lever up to a degree angle. Locate the two screw holes of the mainboard. All cautions and warnings on the equipment should be noted. Never pour any liquid into the opening that could damage or cause electrical shock.

Make sure the safety hook completely clasps the fixed bolt of the retention mechanism.

Position the cooling set onto the retention mechanism. Any attempt to operate beyond product specifications is not recommended. The Ultra ATA interface boosts data transfer rates between the computer and the hard drive up to megabytes MB per second. The module will only fit in the right orientation.

Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. The appearance of your mainboard may vary depending on the model you purchase.

Lower the CPU down onto the socket. Please turn off the power and unplug the power cord before installing the CPU.

If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper. Replace only with the same or equivalent type recommended by the manufacturer.

X Micro ATX mainboard. IDE1 can connect a Master and a Slave drive.

MSI K7N2GM-L, Socket A, AMD (MS-6777) Motherboard

You can insert the expansion cards to meet your needs. Turn over the mainboard again, and plac e the mainboard on the f lat surface. These two connectors connect to the ATX power supply and have to work together to ensure stable operation of the mainboard. While disconnecting the Safety Hook from the fixed bolt, it is necessary to keep an eye on your fingers, because once the Safety Hook is disconnected from the fixed bolt, the fixed lever will spring back instantly.


W hen you fer installing the CPU, make sure the CPU has 7158 heat sink and a cooling fan attached on the top to prevent overheating.

The openings on the enclosure are for air convection hence protects the equipment from overheating. We do not guarantee the damages or risks caused by inadequate operation or beyond product specifications.

Also, desktop platforms with PCI Express Architecture will be designed to deliver highest performance in video, graphics, multimedia and other sophisticated applications. Overheating Overheating will seriously damage the CPU and system, always make sure the cooling fan can work properly to protect the CPU from overheating.

Revision History Revision V1. Do not cover the openings. To clear CMOS you should: Alternatively, please try the following help resources for further guidance.